GE General Electric Oxygen Equipment PT878 Manual Do Utilizador

Página de 297
Chapter 6. Programming Meter Settings
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
125
6.9  Changing Communications Settings (cont.)
Note:
For more information on loading software updates via IrDA, see 
Chapter 8,
 Servicing the PT878, page 195. 
4.
The program now asks for the baud rate. The default rate is 9600 bps. 
a.
Press 
[ENTER]
 to open the drop-down menu.
b.
Use the [
T
] or [
S
] arrow keys to scroll to the desired rate, from 
300 to 115.2K bps.
c.
Press 
[ENTER]
 to confirm the entry.
5.
The next prompt asks for the parity from five options: None, Mark, 
Space, Even or Odd. The default parity is None.
a.
Press 
[ENTER]
 to open the drop-down menu.
b.
Use the [
T
] or [
S
] arrow keys to scroll to the desired parity.
c.
Press 
[ENTER]
 to confirm the entry.
6.
The next prompt asks you to select either one or two stop bits.The 
default number is one. Use the [
W
] and [
X
] keys to scroll to the desired 
number, and press 
[ENTER]
.
7.
The final prompt asks you to select either seven or eight data bits. The 
default number is 8. Use the [
W
] and [
X
] keys to scroll to the desired 
number, and press 
[ENTER]
.
IMPORTANT:
Using IR232 requires the following parameters:
Baud Rate -- 9600
Parity -- None
Stop Bits -- 1
Data Bits -- 8 
To confirm the entries and return to Operate Mode, press 
[F3]
 (OK). The 
PT878 returns to Operate Mode.
To leave the window without confirming the entries, press 
[F2]
 (Cancel) 
or the 
[ESC]
 key. The PT878 returns to Operate Mode.