Extron electronic VTG 400D Folheto

Página de 2
Specifications — VTG 400D, cont’d
Extron VTG 400D Video Test Generator • Specifications
2
 Audio output
Number/signal type ���������������������  1 mono, balanced; 2 mono, unbalanced
Connectors �������������������������������������  (1) 3�5 mm mini stereo jack (unbalanced mono left and right, tip-ring-sleeve) 
1 female RCA jack (unbalanced, tip-ring) 
1 male 3-pin XLR (balanced) (pin 1 = GND, pin 2 = +, pin 3 = -)
The XLR output is immune to phantom power.
Impedance ��������������������������������������  50 ohms unbalanced, 100 ohms balanced
Waveforms �������������������������������������  Pink noise, white noise, sine wave (fixed/swept burst), square wave, 
polarity test
Level ranges �����������������������������������  Pink noise: -72 dBu to -4 dBu (-74 dBV to -6 dBV) (0�20 mV to 500 mVrms) 
Polarity test: -72 dBu to -14 dBu (-74 dBV to -16 dBV) (0�20 mV to 
158 mVrms) 
All other signal types: -72 dBu to +6 dBu (-74 dBV to +4 dBV) (0�20 mVrms to 
1�58 Vrms)
Maximum level (Hi-Z) �����������������  >+6 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm) �����������  >+4�66 dBu, balanced or unbalanced at 1% THD+N
Crest factor (pink noise) ���������������  3�25 (10�24 dB)
Crest factor (white noise) �������������  1�98 (5�95 dB)
Rise time (square wave) ���������������  1�5 ms at 20 Hz to 7 µs at 5 kHz
Rise time (polarity test) ����������������  5 µs
Frequency accuracy (sine wave) �  50 ppm
 Control/remote— test generator
Serial control port ��������������������������  RS-232, 9-pin female D connector
Baud rate and protocol �����������������  9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations �  2 = TX, 3 = RX, 5 = GND
Program control �����������������������������  Extron’s control/configuration program for Windows
® 
Extron’s Simple Instruction Set (SIS
)
 General
Power ����������������������������������������������  100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal
Temperature/humidity ����������������  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing 
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling �������������������������������������������  Convection, no vents
Mounting ����������������������������������������  No
Enclosure type �������������������������������  Metal
Enclosure dimensions �������������������  6�75" H x 9�0" W x 1�75" D  
(17�1 cm H x 22�9 cm W x 4�4 cm D)  
(7�5" [19�1 cm] H including connectors�)
Product weight ������������������������������  3�3 lbs (1�5 kg)
Shipping weight ����������������������������  7 lbs (4 kg)
Vibration �����������������������������������������  ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety �����������������������������������  CE, CUL, UL
EMI/EMC ��������������������������  CE, C-tick, FCC Class A, ICES, VCCI
MTBF �����������������������������������������������  30,000 hours
Warranty �����������������������������������������  3 years parts and labor
All nominal levels are at ±5%.
Specifications are subject to change without notice.
7.6-121108-D10