Brother HL-4040CN Manual Do Proprietário
Appendix (for Europe and Other Countries)
190
B
Important information: regulations
B
Radio interference (220 to 240 volt model only)
B
This printer follows EN55022 (CISPR Publication 22)/Class B.
Before you use this product, make sure that you use one of the following interface cables.
1 A shielded parallel interface cable with twisted-pair conductors and that it is marked IEEE 1284 compliant
(HL-4050CDN / HL-4070CDW only).
2 A USB cable.
The cable must not be more than 2 meters long.
IEC 60825-1 specification (220 to 240 volt model only)
B
This printer is a Class 1 laser product as defined in IEC 60825-1 +A2:2001 specifications. The label shown
below is attached in countries where it is needed.
below is attached in countries where it is needed.
This printer has a Class 3B laser diode which produces invisible laser radiation in the laser unit. You should
not open the laser unit under any circumstances.
not open the laser unit under any circumstances.
Caution
B
Use of controls or adjustments or performance of procedures other than those specified in this User’s Guide
may result in hazardous invisible radiation exposure.
may result in hazardous invisible radiation exposure.
For Finland and Sweden
B
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
Varoitus!
B
Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
Varning
B
Om apparaten används på annat sätt än i denna Bruksanvisning specificerats, kan användaren utsättas för
osynlig laserstrålning, som överskrider gränsen för laserklass 1.
osynlig laserstrålning, som överskrider gränsen för laserklass 1.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT