Behringer Europower PMP4000 Manual Do Proprietário
15
EUROPOWER PMP6000/PMP4000/PMP1000 User Manual
Fig. 5.2: Bridged mono operation
Subwoofer
PMP1000
PMP4000
PMP6000
Rear panel
EUROPOWER EP2000
EUROLIVE
VP1520
EUROLIVE B1800X
Subwoofer
2 x BEHRINGER F1220D
(active)
F.O.H. mix
Monitor mix
This illustration shows the power mixer with a sub-woofer connected to
OUTPUT B. For a bridged mono operation to OUTPUT B, the AMP MODE selector
switch
(27)
must be set to its lower position “BRIDGE”. A separate stereo power
amp (BEHRINGER EUROPOWER EP2000) connected to the preamp main outputs
delivers the stereo main signal. Two active monitor speakers for on-stage
operation are connected to the preamp monitor output.
Fig. 5.3: Dual mono operation
Loudspeaker connection for F.O.H and monitor mix (mono)
PMP1000/PMP4000/PMP6000
Rear panel (excerpt)
2 x BEHRINGER EUROLIVE VP1520
(passive)
2 x BEHRINGER
EUROLIVE VP1220F
(passive)
For a dual mono operation, the AMP MODE switch
(27)
must be set to its center
position (MON1/MONO for PMP4000/PMP6000 or MON for PMP1000)! The two
loudspeaker outputs provide the main and the monitor signals, separately from
each another. Each of these signals is then sent to two speakers wired in parallel.