Hubbell REMOTE HANDSET/SPEAKER AMPLIFIER 723-001 Manual Do Utilizador
Pub. 42004-145C
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
800-492-1212 Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 723-001 Remote
Handset/Speaker Amplifier
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 723-001 Remote Handset/Speaker Amplifier is an important component of the Page/Party
®
communications system and an integral part of GAI-Tronics desktop, desk-edge, and flush-mount stations.
It has been designed to be remotely mounted within an enclosure, allowing the associated subsets to be
placed on a desktop, mounted on the side of a desk, or to be flush mounted. The Model 723-001 Remote
Handset/Speaker Amplifier is constructed of fabricated steel durable enough for even the toughest
industrial environments.
It has been designed to be remotely mounted within an enclosure, allowing the associated subsets to be
placed on a desktop, mounted on the side of a desk, or to be flush mounted. The Model 723-001 Remote
Handset/Speaker Amplifier is constructed of fabricated steel durable enough for even the toughest
industrial environments.
Installation
WARNING
Explosion Hazard – Substitution of components may impair suitability for
Class 1, Div. 2 usage.
CAUTION
Do not install this equipment in hazardous areas or areas other than those indicated on the equipment
approval list in the Specifications section of this manual. Such installation may cause a safety hazard
and consequent injury or property damage.
approval list in the Specifications section of this manual. Such installation may cause a safety hazard
and consequent injury or property damage.
To install the remote handset/speaker amplifier, plug the amplifier into the appropriate enclosure and
tighten the four screws in the corners of the amplifier. See Figure 1 for the typical installation details.
tighten the four screws in the corners of the amplifier. See Figure 1 for the typical installation details.