Intel Desktop Board D945GCLF D945GCLF Manual Do Utilizador

Códigos do produto
D945GCLF
Página de 4
1
 Processor size based on actual Intel® architectural product offerings.
2
 
Perform up to System Bus speed at 533MHz
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL 
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY  
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING 
TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
All products, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. Availability in different channels may vary.
Intel, the Intel logo, Intel. Leap ahead., Intel. Leap ahead. logo, Intel Atom, and Intel Atom Inside are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2008 Intel Corporation. All rights reserved. 0408/KL/MS/PDF  
319542-002US
Technical Specifications
Processor  
Processor Support  
•  Intel® Atom™ Processor 230 integrated  
  (1.6 GHz / 512 KB L2 Cache / 533 System Bus)
Chipset 
•  Intel® 945GC Express Chipset with ICH7
I/O Features 
•  Integrated super I/O LPC bus controller 
•  Ultra ATA 100/66 device support 
•  Two SATA ports (3.0 Gb/s)  
•  One PCI local bus slot
USB 2.0 
•  Four back panel ports  
•  One onboard header providing two ports  
  support
Audio Solution 
•  Integrated High Definition Audio (2+2 channel) 
  with front panel header
10/100 Network Connection 
•  Onboard 10/100 Ethernet LAN
SPI 
System BIOS 
•  4 Mb Flash EEPROM with Intel® Tiano BIOS 
  featuring Plug and Play, IDE drive auto-configure 
•  Advanced configuration and power interface 
  V1.0b, DMI 2.0
Intel® Rapid BIOS Boot 
•  Optimized POST for fast access to PC  
  from power-on
System Memory 
Memory Capacity 
•  One 240-pin DIMM connector  
•  Designed to support up to 2 GB of system 
  memory using DDR2 667 / 533 SDRAM
2
Memory Type 
•  DDR2 667 / 533 SDRAM
2
Memory Voltage 
•  1.8 V  
Wake-up from Network 
•  Wired for Management (WfM) 2.0-compatible 
•  Support for system wake-up using an add-in 
  network interface card with remote wake-up 
  capability
Expansion Capabilities 
•  One PCI bus add-in card connector
Jumpers and Front-Panel Connectors 
Jumpers 
•  Single configuration jumper design 
•  Jumper access for BIOS configuration mode
Front Panel Connectors 
•  Reset, HD LED, Power LEDs, power on/off,  
  aux LED 
•  One USB 2.0 header 
•  Audio header
Mechanical  
Board Style 
•  Mini-ITX/microATX compatible 
•  6.75” x 6.75” (17.145 cm x 17.145 cm)
Desktop Board Power Requirements 
•  ATX12V or SFX12V
Environment 
Operating Temperature 
•  0° C to +55° C 
Storage Temperature 
•  -40° C to +70° C
Regulations and Safety Standards
 
United States and Canada 
  CSA/UL 60950-1, First Edition 
  (Binational Standard) 
Europe 
  (Low Voltage Directive 2006/95/EC) 
  EN 60950-1:2006 
International 
  IEC 60950-1:2001, First Edition
EMC Regulations 
(tested in representative chassis) 
United States 
  FCC 47 CFR Part 15, Subpart B 
Canada 
  ICES-003, Issue-004 Class B 
Europe 
  (EMC Directive 2004/108/EC) 
  EN 55022:2006 and EN 55024:1998 
Australia/New Zealand 
  EN 55022:2006 Class B 
Japan 
  VCCI V-3/2007.04, V-4/2007.04, Class B 
South Korea 
  KN-22:2005 and KN-24:2005 
Taiwan 
  CNS 13438:2006 Class B 
International 
  CISPR 22:2005 +A1:2005 +A2:2006 Class B
Environmental Compliance 
Europe 
  Europe RoHS (Directive 2002/95/EC) 
China 
  China RoHS (MII Order # 39)
Lead-Free: The symbol is used 
to identify electrical and electronic 
assemblies and components in which 
the lead (Pb) concentration level in 
any of the raw materials and the end product is 
not greater than 0.1% by weight (1000 ppm). This 
symbol is also used to indicate conformance to 
lead-free requirements and definitions adopted 
under the European Union’s Restriction on Haz-
ardous Substances (RoHS) directive, 2002/95/EC.
Ordering Information: See the Intel 
Web site at www.intel.com. For the 
most current product information, visit 
developer.intel.com/products/desktop/
motherboard/