Brother P-Touch QL-570 Manual Do Utilizador
Print head maintenance
33
Maintenance of the machine must be done as needed. However, some environments require that maintenance
must be done more frequently (e.g. in dusty conditions).
must be done more frequently (e.g. in dusty conditions).
Print head maintenance
The DK Roll (thermal recording paper type) used with the machine is designed to clean the print head
automatically. When the DK Roll passes the print head during printing and label feeding, the print head is
cleaned.
automatically. When the DK Roll passes the print head during printing and label feeding, the print head is
cleaned.
Roller maintenance
Clean the roller using the cleaning sheet (separately available).
The machine contains only one cleaning sheet. To purchase additional cleaning sheets, refer to
The machine contains only one cleaning sheet. To purchase additional cleaning sheets, refer to
Î
"Accessories" in page 20 of Setup & Operation Guide as needed.
1
Turn the Brother QL-570 off.
2
Hold the DK Roll compartment cover at the front of the
Brother QL-570 and firmly lift up to open the cover.
Brother QL-570 and firmly lift up to open the cover.
3
Pull up the roll release lever and remove the DK Roll.
Maintenance
When doing maintenance on the roller, be sure to use the cleaning sheet exclusive for this machine
only.
If using other cleaning sheet, the surface of roller may be scratched or it may cause a malfunction.
only.
If using other cleaning sheet, the surface of roller may be scratched or it may cause a malfunction.
• Make sure that the spool arms are inserted firmly in the
spool guides on the left and right.
• Insert the spool with the DK Roll located on the right
hand side of the Brother QL-570.