Behringer Eurolight LC2412 Manual Do Utilizador

EUROLIGHT LC2412 User Manual

Chases
The expression “Chases” refers to situations in which individually programmed 

light steps (up to 99 steps) are executed in succession (the lights “chase” each 

other). These steps can be both individual presets as well as memories.
You can create extremely complex chases. For example, parameters such as 

fade-in speed of a step, chase sequence speed and their control via the built-in 

beat generator or music can all be programmed.

Crossfade
There are several ways to alternate between various stored or newly developed 

lighting situations. Conversely, you can also alternate back and forth between 

individual steps of a single chase manually or automatically.

Preview
With this function, you can preview stored memories or chases without these 

being visible on the stage. This way, you can discretely control the next step 

before letting it be seen on the stage. 

Sound to light
This function is more widely known as “party light”. It basically means that your 

music drives the light show. An incomming music signal is broken down into 

three frequency ranges (bass, mids and highs), each of which is assigned to a 

(memory) channel.  Depending on the volume of the respective signal segments, 

the lights assigned to them will shine accordingly. You can even program a setup 

for song pauses.

MIDI
The LC2412 can be controlled via MIDI. Two EUROLIGHT LC2412s can be operated 

as master and slave by using the MIDI interface. Entire shows can be stored and 

recalled by means of a MIDI sequencer.

DMX512
The DMX digital protocol lets you flexibly assign 78 of the 512 digital channels to 

individual light console channels (softpatch). 

Memory card
The EUROLIGHT LC2412 offers you access to 120 storable lighting setups 

(memories) that can easily be altered. A virtually unlimited archive of lighting 

setups can be created by using the interchangeable memory cards on which 

these setups are stored. The sky is the limit when you put your creativity to the 

test with the 99 programmable chases, each consisting of 99 single steps.

The control panel of your LC2412 is divided into various areas with different 

functions. The way the controls on the LC2412 were designed makes using the 

unit and capturing current settings a breeze. The control elements are described 

on the following pages according to the functions they play. If parts of the unit 

are shown in light grey in an illustration, that means that these controls belong 

to another section (described elsewhere in the manual).
All control elements and function keys are provided with control lights to enable 

you full oversight of the setup/functions currently selected. 
The sections:  

(1)

  A PRESET section,  

(2)

  B MEMORY-section + bank 

display,  

(3)  

sound to light,  

(4)

  FLASH keys,  

(5)

  programming section,  

(6)

  MAIN section,  

(7)

  CHASE section.

The LC2412 also has additional functions that cannot be assigned to a particular 

section (special channels):

(8) 

SPECIAL 1 key. Used to activate a special channel, for example for turning a 

fog machine on/off. 

(9) 

SPECIAL 2 key. The same function as SPECIAL 1 key. Just like in the case of 

other channels, three DMX channels can be assigned to these two channels 

(i.e. to SPECIAL 1/2).  Both special channels are then labeled as channels 

25 and 26 on the console. SPECIAL 1 and SPECIAL 2 keys can be programmed 

as switches, keys or kill keys. Additional information on this subject can be 

found in chapter 7.3.

(10) 

POWER switch. Used to power up the EUROLIGHT LC2412. The POWER 

switch should always be in the “Off” position when you connect the unit to 

the mains.

(11) 

The BNC connector is used for connecting a gooseneck lamp (optional).