Brocade Communications Systems Upgrade Pef IPMC5000PEF IPMC5000PEF Manual Do Utilizador

To disable PIM6 SM snooping, enter the no ipv6 pimsm-snooping command.

device(config)#no ipv6 pimsm-snooping

If you also want to disable IP multicast traffic reduction, enter the no ipv6 multicast command.

device(config)#no ipv6 multicast

Syntax: [no] ipv6 pimsm-snooping

Enabling PIM6 SM snooping on a VLAN

Perform the following steps to enable PIM6 SM snooping on a VLAN.

Configure a VLAN and add the ports that are connected to the device and host in the same port-
based VLAN.

device(config)#vlan 20

device(config-vlan-20)#untagged etherenet 1/1/5 ethernet 1/1/7 ethernet 1/1/11

Enable MLD snooping passive on the VLAN.

device(config-vlan-20)#multicast6 passive

Enable PIM6 SM snooping on the VLAN.

device(config-vlan-20)#multicast6 pimsm-snooping

Syntax: [no] multicast6 pimsm-snooping

Disabling PIM6 SM snooping on a VLAN

When PIM6 SM snooping is enabled globally, you can still disable it for a specific VLAN. For example,
the following commands disable PIM6 SM snooping for VLAN 20. This setting overrides the global
setting.

device(config)#vlan 20

device(config-vlan-20)#multicast6 disable-pimsm-snoop

Syntax: [no] multicast6 disable-pimsm-snoop

PIM6 SM snooping show commands

This section shows how to display information about PIM6 SM snooping, including:

•

•

 on page 67

Displaying PIM6 SM snooping information

To display PIM6 SM snooping information, enter the show ipv6 multicast pimsm-snooping
command.

device#show ipv6 multicast pimsm-snooping

vlan 25, has 2 caches.

1    (0:11 1:3) has 2 pim join ports out of 2 OIF

     1/1/2 (age=0), 2/1/3 (age=0), 

Enabling PIM6 SM snooping on a VLAN