Brother P-Touch 2730 Manual Do Utilizador

Feeding Tape

The Feed & Cut function feeds 23mm of blank tape then cuts the tape.

Hold down the Shift key and press the Preview key.
"Feed & Cut?" will appear on the LCD display.

Using the   or   key to select the "Feed & Cut" option and then press either OK or 
Enter.

The message "Feeding Tape... Please Wait" appears while the tape is fed, and 

then the tape is cut.

This function will advance the tape approximately 23 mm resulting in a blank label 
sticking out of the tape cassette. This action is recommended when using Fabric and 
Extra Strength Adhesive tapes, which should be cut using scissors.

Hold down the Shift key and press the Preview key.
"Feed & Cut?" will appear on the LCD display.

Using the   or   key to select the "Feed Only" option and then press either OK or 
Enter key.
The message "Feeding Tape... Please Wait" appears while the tape is fed.

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape 

cassette.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the 

tape to jam.

To exit or cancel this function press Escape.

To exit or cancel this function press Escape.