Williams Sound PPA T35 Manual Do Utilizador

©2007, Williams Sound Corp.  CAT 099D

2

Audio Level Control:

Push-button audio level controls, adjustable to 0 to -50 dB

Audio Level Indicators:

10 LED array that reads +9 to -18 at 3 dB intervals

Power On Indicator:

Green LED indicates power on

Phones Output:

Mono signal, 1/4" TRS stereo jack, 67 mW, maximum in 50 ohms (adjustable 0 to -40 dB)

Audio Input:

Combination 3-pin XLR, 1/4" TRS jack

Line Output:

RCA jack, -10 dBV (.32 VRMS) output, impedance 100 Ω

LCD Menu Controls:

Applications Presets (Music, Voice, Hearing Assist) 

(Push-Button Selection)

Bandwidth, Frequency, Audio Input Source (Microphone, Line, Simplex), High Pass Filter, Low Pass
Filter, Compressor Slope, Compressor Gain, RF Output Power

Input Levels (Bal or Unbal):

Nominal (1st Amber LED)

Maximum (Input Overload LED) Absolute Maximum Ratings**

Microphone Simplex-Mic:

-60dBV (1 mV RMS)

-20 dBV (100 mV RMS)

+20dBV (10.0 V RMS)

Line:

-8dBV (400 mV RMS)

+16 dBV (6.3 V RMS)

+20 dB V (10.0 V RMS)

Simplex Mode:

12 volts simplex power (DIN 45596) on the 3-pin XLR connector

RF “Off” Timer:

Turns off RF signal after 1 hour of no audio activity

Common Mode Rejection:

> 57 dB @ 1 kHz, Mic or Line 

Total Harmonic Distortion:

< 0.25% @ -10 dB V audio line output, 1 kHz

Approvals:

FCC, RoHS, WEEE

Warranty:

5 years, parts and labor*

**Note: Stresses above these ratings may cause permanent damage. Exposure for extended periods may degrade reliability.

*90 days on accessories.