Whirlpool WFI910H0AS Manual Do Proprietário

Power supply cord is unplugged.

Plug into a grounded outlet.

Household fuse is blown, or a 
circuit breaker is tripped.

Replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.

The control knob is set 
incorrectly.

Touch the display area on the control panel to select a cooking 
surface before selecting a function.

The cooktop control lockout is 
set.

See “Control Lock” in the “Cooktop Use” section.

Cooktop is turned off.

The Power key was unintentionally touched. Press POWER 
again. Reset the cooktop.

Improper cookware being used

See “Cookware” section.

Cooktop control set to incorrect 
heat level

See “Cooktop Controls” in the “Cooktop Use” section.

Range is not level.

Level the range. See the Installation Instructions.

The electronic oven control was 
set incorrectly.

See “Electronic Oven Controls” section.

Delay Start was set.

See “Cook Time” section.

The oven control lockout is set.

See the control lock keypad feature in the “Feature Guide” 
section.

The range is in Demo Mode.

Demo Mode will deactivate all heating elements. See “Demo 
Mode” in the “Electronic Oven Controls” section.

Oven temperature calibration 
needs adjustment.

See “Oven Temperature Control” in the “Electronic Oven 
Controls” section.

Needs service (oven indicator 
lights are flashing).

See “Control Display” in the “Electronic Oven Controls” 
section. If the indicator light(s) keeps flashing, call for service. 
See cover for contact information.

Power failure (display shows 
flashing time)

Clear the display. On some models, reset the clock, if needed. 
See “Clock” keypad feature in the “Feature Guide” section.

Error code (display shows letter 
followed by number)

Press the CANCEL keypad to clear the display. See “Control 
Display” in the “Electronic Oven Controls” section. If it 
reappears, call for service. See cover for contact information.

Improper pan being used 
(“replace pan” animation showing 
in the display when you place a 
saucepan on an induction 
surface cooking area)

See the “Pan Detection” section. Check that the saucepan is 
ferromagnetic. Check that the diameter of the saucepan is large 
enough. Center the saucepan on the surface cooking area. 
Allow the saucepan to cool down in the event that it has 
become hot when used. Switch the surface cooking area off, 
then on again. If the display still does not light up, turn power 
off at the circuit breaker. Wait 20 seconds and turn power back 
on.

Long cooking time (performance 
boost function display flashing 
and switching off)

The Performance boost function operates the surface cooking 
area with the most power. During long cooking times, it is 
possible that the function will switch the surface cooking area 
off to keep the cooktop from overheating. You can continue to 
use the cooktop if the display is not flashing.

Error code (display flashing “Er” 
and numbers)

If an “Er” and a series of numbers appear in the display panel, 
turn power off at the circuit breaker. Turn on again. If problem 
continues, call customer service. See the cover for contact 
information.