Whirlpool TES325MQ1 Manual Do Utilizador

SURFACE UNDER COOKTOP (on some models)

Do not remove the cooktop to avoid product damage.

For more information, see “Lift-up Cooktop” section.

■

Steel-wool pad

■

Glass cleaner and paper towels or nonabrasive plastic 
scrubbing pad:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad

BROILER PAN AND GRID (on some models)

Do not clean in the Self-Cleaning cycle.

■

Mildly abrasive cleanser:

Scrub with wet scouring pad.

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with scouring or steel-wool 
pad.

■

Oven cleaner:

Follow product label instructions.

■

Dishwasher

STORAGE DRAWER ( on some models)

Make sure drawer is cool and empty before cleaning.

For more information, see “Storage Drawer” section.

■

Mild detergent

Remove all stored items from drawer and lift out drawer liner.

■

Clean with mild detergent.

WARMING DRAWER and TRAY ( on some models)

Make sure drawer is cool and remove tray.

■

Mild detergent (for both)

The oven light is a standard 40-watt appliance bulb. It will come 
on when the oven door is open. The oven light will not work 
during the Self-Cleaning cycle. On some models, when the oven 
door is closed, press the manual oven light switch on the 
backguard to turn on and off.

Before replacing, make sure the oven and cooktop are cool and 
the control knobs are in the off position.

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Use a putty knife or screwdriver and insert it at the bottom 

corner of the door stop clip.

2. Pry door stop clip free and remove from front frame hinge 

slot. Take care not to scratch finish.

3. Repeat procedure for other door stop clip.

1. Open the oven door. Insert door removal pins, included with 

your range, into both hinge hangers. Do not remove the pins 
while the door is removed from the range.

2. Slowly close the door until it rests against the door removal 

pins.

3. Grasp the door on the sides with your fingers on the front of 

the door and your thumbs on the inside surface.