Western Digital WD Black2 Dual Drive Guia De Configuração Rápida
4 | WD Black
2
Dual Drive Quick Install Guide
Option 2: Cloning Your Existing Hard Drive
1. Insert the USB web key into your computer’s external
1. Insert the USB web key into your computer’s external
USB port to go to the software download site (Figure B,
Step 01). If you have difficulty accessing the software
download, go to http://support.wd.com.
Step 01). If you have difficulty accessing the software
download, go to http://support.wd.com.
2. Select and download both the Acronis
®
True Image
™
WD
Edition and the dual drive installation software to your
local drive or storage. If you have difficulty accessing the
software download, please go to http://support.wd.com.
local drive or storage. If you have difficulty accessing the
software download, please go to http://support.wd.com.
3. Remove the new dual drive from the ESD bag.
4. Connect the SATA connector end of the included SATA
4. Connect the SATA connector end of the included SATA
to USB adapter cable to your dual drive (Figure B, Step
02).
02).
5. Launch Acronis True Image WD Edition from your
computer. Follow the instructions to transfer your OS and
data from your original drive to the dual drive (Figure B,
Step 03). See Article #10491 in our knowledge base at
http://support.wd.com if your original drive is larger than
your dual drive.
data from your original drive to the dual drive (Figure B,
Step 03). See Article #10491 in our knowledge base at
http://support.wd.com if your original drive is larger than
your dual drive.
6. After cloning is complete, shut down the computer and
unplug the power cord.
7. Disconnect the SATA to USB adapter cable from the
computer and the new dual drive.
8. Remove the notebook battery.
9. Remove the drive currently installed in your computer
9. Remove the drive currently installed in your computer
and install the dual drive (Figure B, Step 04).
10.Replace the battery and power on your computer.
11.Run the dual drive installation software that you
11.Run the dual drive installation software that you
downloaded in step number 2 to activate and partition
the HDD (Figure B, Step 05).
the HDD (Figure B, Step 05).
12.If needed, attach the original HDD using the USB/SATA
cable and transfer any remaining user data from your
original HDD to your new WD dual drive (Figure B, Step
06).
original HDD to your new WD dual drive (Figure B, Step
06).
Information furnished by WD is believed to be accurate and reliable; however, no
responsibility is assumed by WD for its use nor for any infringement of patents or
other rights of third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of WD. WD reserves the
right to change specifications at any time without notice.
responsibility is assumed by WD for its use nor for any infringement of patents or
other rights of third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of WD. WD reserves the
right to change specifications at any time without notice.
Western Digital, WD, and the WD logo are registered trademarks in the U.S. and
other countries of Western Digital Technologies, Inc., and WD Black
other countries of Western Digital Technologies, Inc., and WD Black
2
is a trademark
in the U.S. and other countries of Western Digital Technologies, Inc. Other marks
may be mentioned herein that belong to other companies.
may be mentioned herein that belong to other companies.
© 2013 Western Digital Technologies, Inc. All rights reserved.
2079-800000-
800 Oct 2013
Figure B - Clone Existing HDD
Endeavor_QIG.book Page 4 Wednesday, October 23, 2013 2:17 PM