Winegard TV Receiver SK-3003 Folheto

Select System Setup.

Press Menu on 

your remote, 

and then select 

Setup.

Select Continue.

The following instructions assume that the TRAV’LER

®

 antenna has found and locked onto satellites 101°, 

110° and 119°. There should be an asterisk next to 101°, 110°, and 119° on the TRAV’LER interface. 

In most DIRECTV receivers, the setup is done through the “Repeat Satellite Setup” option in your receiver 

menu. The following instructions are based upon an H24 receiver. If your receiver differs from the options 

shown, you may need to consult your receiver manual. The wording and display used in your receiver 

may differ slightly.

In your receiver 

Menu, you will 

need to identify 

the Satellite 

Menu. The 

Satellite Menu 

will have an 

option for 

Satellite Setup.

You may be 

required to press 

the DASH (-) 

before proceeding 

(underneath #7 on 

the remote).

Set Dish Type 

for 02: 3-LNB 

(18”x20”).

Set the Switch 

Type for 

02: Multiswitch. 

Press Continue.  

Your installation 

will be verified.

Errors may be 

displayed on the 

Installation Status 

screen. This is 

normal to see one 

or two boxes with 

an X instead of a   .

Select Continue.