WHP Wireless DL360 Manual Do Utilizador

After installing DIMMs, use RBSU to configure the system for online spare 
memory support ("Configuring Online Spare Memory" on page 

).  

 

1.  Power down the server ("Powering Down the Server" on page 

2.  Extend the server from the rack, if applicable ("Extending the Server from 

the Rack" on page 

3.  Remove the access panel ("Removing the Access Panel" on page 

4.  If installed, remove the half-length expansion board ("Expansion Board" on 

page 

5.  Open the DIMM slot latches. 

6.  Install the DIMM. 

 

7.  If removed, reinstall the half-length expansion board ("Installing an 

Expansion Board" on page 

8.  Install the access panel ("Installing the Access Panel" on page 

9.  If you are installing DIMMs in an online spare configuration, use RBSU to 

configure this feature ("Configuring Online Spare Memory" on page