Wayne 3014 Manual Do Utilizador

4 

1.  Open and Close Cycle Control:  Allows garage door 

to be started and stopped by push button, transmitter or 
wall station. The next impulse sends garage door in 
opposite direction. 

 
2. Emergency Disconnect:  Manual disconnect permit-

ting operation of door during power failure with auto-
matic reconnect when opener is reactivated. See pg 
32. 

 
3. Opener light: Automatically turns on when opener is 

activated and remains on for 4 minutes for convenience 
and safety. 

 
4.  Mechanical Door Lock: When properly adjusted, 

opener locks door in closed position preventing un-
wanted entry.  See Adj. # 3 pg 28. 

 
5.  Obstruction Warning Light: The convenience light 

will flash after sensing an obstruction in the down direc-
tion and/or if the safety system malfunctions while in 
the open position. 

 
6. Motor: Permanently lubricated, thermally protected, 

heavy duty motor with automatic reset. 

7. Safety System: Independent up and down force ad-

justments. When properly adjusted, the safety system 
will automatically reverse when obstructed in down di-
rection and return to fully open position.  The door will 
stop when obstructed in the up direction. See Adj. #2, 
pg 28. 

 
8. Infrared Safety Sensors: Wired or wireless infrared 

reversing sensors detect an obstruction in door path 
and react by reversing door. 

 
9.  Multi-Function Wall Station:  Wired wall station pro-

vides up/down door motion control and independent 
overhead light on/off control.  Wireless wall station pro-
vides up/down door motion control, independent over-
head light on/off control, door down delay, adjustable 
“pet position” function, and “pet position” program but-
ton. 

 
10. Homelink™  Compatibility:   Opener is capable of 

“learning” automobile equipped Homelink™ transceiv-
ers. Visit: www.homelink.com. 

 
11. Rolling Code Technology: Wireless transmitters and 

wall stations use rolling code which prevents would-be 
thieves from “grabbing” the transmitter’s digital code.

Identify the door referring to illustrations below and verify that the door type is a sectional door with curved track.  Do not 
install if the door is any type of one piece door.