Sony NAS-SV20DI Manual Do Utilizador
15
GB
G
e
ttin
g
g
st
art
e
art
e
d
Preparing the unit and the remote control
Connecting the antenna and the power cord
Note
If you place the unit in an unstable location, it may move when you connect or disconnect cables. Hold the unit firmly
when you connect or disconnect cables.
when you connect or disconnect cables.
1
Connect the DAB/DAB+ wire
antenna (aerial) to the ANTENNA
DAB 75
antenna (aerial) to the ANTENNA
DAB 75
Ω terminal (UK model
only).
Use an external DAB/DAB+ antenna for a
more robust DAB/DAB+ signal. It is
recommended you only use the supplied
DAB/DAB+ wire antenna for areas of strong
DAB/DAB+ reception or as a temporary
measure until you install an optional external
antenna.
Use a 75
more robust DAB/DAB+ signal. It is
recommended you only use the supplied
DAB/DAB+ wire antenna for areas of strong
DAB/DAB+ reception or as a temporary
measure until you install an optional external
antenna.
Use a 75
Ω coaxial cable with male F type
connector to connect the unit to an external
antenna.
Be sure that the antenna is fully extended.
antenna.
Be sure that the antenna is fully extended.
To a wall outlet
DAB/DAB+ wire antenna (aerial)*
WARNING
DO NOT plug the power cord
into a wall outlet until all other
connections have been made.
into a wall outlet until all other
connections have been made.
* The DAB/DAB+ wire antenna (aerial) and the ANTENNA DAB 75
Ω are available for
the UK model only.
AC adaptor
Power cord
1
2
3
DAB/DAB+ wire antenna (aerial)