Sony NAS-SV20DI Manual Do Utilizador
36
GB
Listening to DAB/DAB+ (available for the
UK model only)
UK model only)
You can tune in DAB/DAB+ stations. Presetting
stations in advance allows you to recall them by
number.
DAB/DAB+ stations can be received with the UK
model only.
stations in advance allows you to recall them by
number.
DAB/DAB+ stations can be received with the UK
model only.
Performing a DAB/DAB+
Initial Scan
Initial Scan
When you select the DAB/DAB+ function for the
first time after purchase, the unit automatically
starts a DAB/DAB+ Initial Scan and obtains a
DAB/DAB+ service component list. However, you
can perform a DAB/DAB+ Initial Scan manually.
first time after purchase, the unit automatically
starts a DAB/DAB+ Initial Scan and obtains a
DAB/DAB+ service component list. However, you
can perform a DAB/DAB+ Initial Scan manually.
1
Press FUNCTION repeatedly to
select the DAB/DAB+ function.
select the DAB/DAB+ function.
“DAB” lights up on the display.
2
When “Start Initial Scan? Press
ENTER.” appears, press ENTER.
ENTER.” appears, press ENTER.
The DAB/DAB+ Initial Scan starts. When
scanning is completed, a service component
list (a list of available DAB/DAB+ stations)
is created.
scanning is completed, a service component
list (a list of available DAB/DAB+ stations)
is created.
Tip
You can perform the Initial Scan manually. Press
OPTIONS and select “Initial Scan.” When “Start Initial
Scan? Press ENTER.” appears, press ENTER.
OPTIONS and select “Initial Scan.” When “Start Initial
Scan? Press ENTER.” appears, press ENTER.
Notes
•
All preset stations that have been stored in the unit are
cleared when you perform a DAB/DAB+ Initial Scan or
when scanning is cancelled.
cleared when you perform a DAB/DAB+ Initial Scan or
when scanning is cancelled.
•
Before unplugging the DAB/DAB+ wire antenna
(aerial), make sure the unit is turned off to preserve
your own DAB/DAB+ settings.
(aerial), make sure the unit is turned off to preserve
your own DAB/DAB+ settings.
Tuning in a DAB/DAB+
station
station
1
Be sure that the DAB/DAB+ Initial
Scan has been performed and a
service component list has been
created.
Scan has been performed and a
service component list has been
created.
2
Press FUNCTION repeatedly to
select the DAB/DAB+ function.
select the DAB/DAB+ function.
“DAB” lights up on the display.
3
Press ./>.
The unit tunes in to the previous or the next
DAB/DAB+ station on the service
component list.
DAB/DAB+ station on the service
component list.
FUNCTION
M/m/ENTER
MEMORY
.
/>
BACK
DISPLAY
Channel label
Station name
DLS (Dynamic Label Segment)