Sony NAS-SV20DI Manual Do Utilizador

Make sure the iPod/iPhone is connected securely.

You can use the unit as a battery charger for an iPod/
iPhone when the unit is on or when “Network
Standby” set to “On” (page 35).

This may sometimes happen, depending on the iPod/
iPhone model you are using.

Connect the antenna (aerial) correctly (page 15).

Adjust the antenna position.

Keep the antenna away from the power cord and the
AC adaptor to avoid picking up noise.

Turn off nearby electrical equipment.

Check the antenna connection, then perform the
DAB/DAB+ Initial Scan procedure (page 36).

The current DAB/DAB+ station is not available.
Select a different station (page 36).

If you have moved to another area, some stations/
frequencies may have changed and you may not be
able to tune into your usual broadcast. Perform the
DAB/DAB+ Initial Scan procedure to retune the
radio stations (page 36). (Performing this procedure
clears all previously stored presets.)

Depending on the security software used on the
computer, the computer may not appear in the server
list of the unit. For details, refer to the help of the
security software.

You may have turned this unit on before you turned
the server on. Enter the options menu and select
“Refresh” in the server list display to refresh the
server list (page 43).

Make sure that the router/wireless LAN router/access
point is turned on.

Make sure that the server is turned on.

Confirm that the server has been set correctly (page
38). Confirm that the unit has been registered with
the server and is set to allow music streaming from
the server.

Confirm that the unit and the server are connected to
the router/wireless LAN router/access point
correctly. Enter the settings menu and select
“Network Settings” - “Tools” - “Connection
Diagnosis” (page 32). For further information on the
network connection, refer to the customer support
site (page 64).

The server may be unstable. Restart it.

If the ICF (Internet Connection Firewall) function is
active on the computer, this may prevent the unit
from connecting to the computer (only when your
computer is used as a server). You may need to
change the firewall settings to allow the unit to
connect. (For details on changing the firewall
settings, refer to the operating manual of your
computer).

Shuffle repeat play is selected. Set the play mode to
normal (page 48).

The bandwidth of your wireless LAN may be too
low. Move the unit and the wireless LAN router/
access point closer to each other, without any
obstacles between them.

When you are using your computer as a server, the
computer may be running many applications. If anti-
virus software is active on the computer, temporarily
disable that software as it needs large amounts of
system resources.

Depending on the network environment or any radio
interference, it may not be possible to play tracks
with more than one device operating at one time.
Turn off any other devices to enable the unit to play
tracks.

You cannot play any files other than audio files.

Confirm that the server has been set correctly (page
38). Confirm that the unit has been registered with
the server and is set to allow music streaming from
the server.

Check to confirm whether the audio file on the server
is damaged or erased. Refer to the operating manual
of the server.

The iPod/iPhone cannot be charged.

“Remote UI Mode” is automatically set to “On”
when an iPod/iPhone is connected to the
iPod/iPhone dock of the unit.

“Remote UI Mode” cannot be set to “Off.”

DAB/DAB+ (UK model only)

A DAB/DAB+ station cannot be received or
there is a severe hum or other noise.

A DAB/DAB+ station cannot be received.

Home Network

The server (such as a computer) does not
appear in the server list. (“No Server”
appears.)

You cannot play audio data normally.

The sound skips during playback.

“Cannot Play” appears.