Central Pneumatic 98525 Manual Do Utilizador

SKU 98525

For technical questions, please call 1-800-444-3353.

Page 3

tool. Distractions are able to result in

the loss of control of the tool.

personal safety

Stay alert. Watch what you are do-

ing and use common sense when

operating the tool. Do not use the

tool while tired or under the influ-

ence of drugs, alcohol, or medica-

tion. A moment of inattention while

operating the tool increases the risk

of injury to persons.
dress properly. do not wear loose

clothing or jewelry. Contain long

hair. keep hair, clothing, and

gloves away from moving parts.

Loose clothes, jewelry, or long hair

increases the risk of injury to persons

as a result of being caught in moving

parts.
avoid unintentional starting. Be

sure the switch is off before con-

necting to the air supply. Do not

carry the tool with your finger on the

switch or connect the tool to the air

supply with the switch on.
remove adjusting keys and

wrenches before turning the tool

on. A wrench or a key that is left at-

tached to a rotating part of the tool

increases the risk of personal injury.
do not overreach. keep proper

footing and balance at all times.

Proper footing and balance enables

better control of the tool in unexpect-

ed situations.

use safety equipment. A

dust mask, non-skid safety

shoes and a hard hat must

be used for the applicable

conditions. Wear heavy-duty work

gloves during use.

always wear eye protec-

tion. Wear ANSI-ap-

proved safety goggles.

always wear hearing

protection when using

the tool. Prolonged expo-

sure to high intensity noise

is able to cause hearing loss.
risk of electric Shock. this tool

is not provided with an insulated

gripping surface. Contact with a

″live″ wire will also make exposed

metal parts of the tool ″live″ and

shock the operator.
avoid body contact with grounded

surfaces such as pipes, radiators,

ranges and refrigerators. There is

an increased risk of electric shock if

your body is grounded.
explore the workpiece to avoid

contact with hidden wiring. Thor-

oughly investigate the workpiece for

possible hidden wiring before per-

forming work. Contact with live wiring

will shock the operator.
danger! keep hands and body

away from cutting area and blade.

keep your second hand on aux-

iliary handle or motor housing.

Contact with the blade will result in a

serious injury.
do not reach underneath the work-

piece. There is no guard to protect

you from the blade below the work-

piece.
never hold a piece being cut in

your hands or across your leg. It is

important to support the work proper-