Chamberlain CIGCWC Internet Connectivity Kit Manual Do Utilizador

2

The Chamberlain

®

 Internet Gateway allows you to control your garage 

door opener from your internet connected computer or smart phone. The 
MyQ

®

 Control Panel has been programmed at the factory to the 

Chamberlain

®

 Internet Gateway.

  1.1   Connect the Chamberlain

®

 Internet Gateway to a router with the 

ethernet cable. If you only have access to a Wi-Fi signal and not a 
router, you must use a wireless ethernet adapter (not provided) to 
connect to the internet.

  1.2   Connect power to the Chamberlain

®

 Internet Gateway. The blue 

and green LEDs will blink momentarily and then the blue and green 
LEDs will light solid. 

   From your computer, go to www.mychamberlain.com and follow the 

instructions to create an account. Use a computer for this step; you 
cannot create an account from a mobile device.

   Locate the serial number on the bottom of the Chamberlain

®

 Internet 

Gateway. Register the Chamberlain

®

 Internet Gateway with the serial 

number. Your garage door opener will appear in the "Places" section of 
your account when registration is complete. If the garage door opener 
does not appear, follow step 4 below.

  4.1   Click on “Manage Places>Add New Device>Garage Door Opener” 

and follow the directions.

  4.2   Once you click ADD you have 3 minutes to press the LEARN 

button two times on the MyQ

®

 control panel. The red learn LED 

will turn on.

  4.3   The red learn LED will turn off when programming is complete. 

The blue LED on the Chamberlain

®

 Internet Gateway will light to 

indicate that a device has been programmed. Once the control 
panel is programmed, it will appear on your screen and you can 
then name the device (e.g., My Control Panel, etc.).

 4.4 

Click 

SAVE.

The control panel has now been programmed to the internet gateway and 
the garage door can now be controlled from a computer or smartphone. 
Follow the same steps to add other MyQ

®

 devices.

Visit the app store for your smartphone to download the MyQ

®

 app. With 

the app you can monitor and control your garage door opener and MyQ

® 

devices. You can also add or remove other MyQ

®

 accessories.

Router

Ethernet 
Cable

Power 
Adapter

Green LED

Blue LED

After power up, the LED lights will show the status of the Chamberlain

®

 

Internet Gateway.
 •   GREEN On Solid – The Chamberlain

®

 Internet Gateway has an IP 

address and is connected to the Internet.

 •   GREEN flashing steadily On & Off – The Chamberlain

®

 Internet 

Gateway has an IP address, but is not accessing the internet. 
Check your router settings and internet connections.

 •   

GREEN Off – The router is not providing an IP address to the 
Chamberlain

®

 Internet Gateway. Check your router settings and 

internet connections.