Cellboost BOXER 999-823 Manual Do Utilizador

Machine Start-up
To start the machine, the operator must:

1. Stand on the operator's platform (Item 1, 

2. Move the throttle lever (Item 2, 

) to about half way between fast and idle engine 

speeds. 

3. Move the engine choke lever (Item 3, 

) to the CHOKE position.

4. Rotate and hold the starter switch (Item 4, 

)  in the START position until the 

engine starts. 

Figure 3–5 Operator's Platform, Engine Throttle, Choke and Key Switch

5. As soon as the engine starts, release the starter key. The key will automatically return to the 

RUN position. 

6. Leave the throttle setting at about the halfway position and allow the engine to idle. This will 

begin warming the hydraulic oil. 

7. If the engine begins to labor or sputter, move the choke control lever to the normal run 

position.  It may be necessary to move the choke lever only part way to the normal position 
until the engine has warmed up.

8. In cold weather (32º F [0º C]) after about 5 minutes of engine idling, operate all of the main 

hydraulic controls to cycle warmed hydraulic oil through the hydraulic lines into the 
cylinders and hydraulic motors. Allow the engine to idle for another 5 minutes before 
beginning any machine operations.

2445