Cellboost BOXER 999-823 Manual Do Utilizador

The “cogging” condition is most likely to occur while operating in a forward direction pulling a 
heavy load, and during the first 50 hours of track usage. It is caused by the tension spring being 
fully compressed due to high track load. If a cogging condition occurs, immediately stop 
machine travel and machine functions and reverse travel direction slightly to de-compress track 
tension. Continued cogging will cause the track drive sprocket to seat into the rubber track 
incorrectly, and cause damage to the track. If cogging occurs, stop travel function and check for 
and remove any debris or foreign matter in the drive system, check track for proper tension as 
shown in Section 4 of this manual, and resume operation.

Push both control 
levers forwards to 
travel straight 
forward. The 
farther these are 
moved, the faster 
the machine will 
travel. See 

2427

Figure 3–8 

Forward Travel

Pull both control 
levers backwards 
to travel straight 
backwards. The 
farther these are 
moved, the faster 
the machine will 
travel. See 

2428

Figure 3–9  Reverse 

Travel