Central Hydraulics Marine Instruments 94143 Manual Do Utilizador
SKU 94143
For technical questions, please call 1-800-444-3353
PAGE 3
PERSONAl SAFETY
Stay alert. Watch what you are doing, and use common sense when oper-
1.
ating a power tool. Do not use a power tool while tired or under the influ-
ence of drugs, alcohol, or medication. A moment of inattention while operating
power tools may result in serious personal injury.
dress properly. do not wear loose clothing or jewelry. contain long
dress properly. do not wear loose clothing or jewelry. contain long
2.
hair. Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
Avoid accidental starting.
Avoid accidental starting.
3.
Be sure the Gasoline Engine’s Power Switch is
in its “OFF” position before moving the Auger and before performing any
service, maintenance, or cleaning procedures on the unit.
Remove adjusting keys or wrenches before turning the Auger on.
Remove adjusting keys or wrenches before turning the Auger on.
4.
A wrench
or a key that is left attached to a rotating part of the machine may result in per-
sonal injury.
do not overreach. Keep proper footing and balance at all times.
do not overreach. Keep proper footing and balance at all times.
5.
Proper
footing and balance enables better control of the power tool in unexpected situa-
tions.
6.
Use safety equipment. Always wear eye protection. Always wear
ANSI-approved safety impact goggles when using this product. ANSI-
approved hearing protection, helmet, and steel toed shoes must also be
used.
TOOl USE ANd cARE
do not force the tool. Use the correct tool for your application.
1.
The correct
tool will do the job better and safer at the rate for which it is designed.
do not use the Auger if the Gasoline Engine’s Power Switch does not turn it
do not use the Auger if the Gasoline Engine’s Power Switch does not turn it
2.
on or off. Any tool that cannot be controlled with its power switch is dangerous
and must be replaced.
Store idle tools out of reach of children and other untrained persons.
Store idle tools out of reach of children and other untrained persons.
3.
Tools
are dangerous in the hands of untrained users.
Maintain tools with care.
Maintain tools with care.
4.
Properly maintained tools with a sharp cutting edge
are less likely to bind and are easier to control. Do not use a damaged tool. Tag
damaged tools “Do not use” until repaired.
check for misalignment or binding of moving parts, breakage of parts, and
check for misalignment or binding of moving parts, breakage of parts, and
5.
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly main-
tained tools.