Zweita Pocket LOOX N/C Series Manual Do Utilizador
Important notes
This chapter contains safety notes and important information you must observe when using your
Pocket PC.
This Pocket PC complies with the relevant safety regulations for data processing equipment. If you
have questions as to whether you can set up and operate the Pocket PC in the intended
environment, please contact your sales point or our hotline/help desk.
Pocket PC.
This Pocket PC complies with the relevant safety regulations for data processing equipment. If you
have questions as to whether you can set up and operate the Pocket PC in the intended
environment, please contact your sales point or our hotline/help desk.
Safety notes
Observe the safety notes in the "Safety" manual and the following safety notes to prevent
damage to your device, data loss or injuries.
damage to your device, data loss or injuries.
!
•
During installation and before operating the device, observe the instructions on environmental
conditions in the "Technical data" chapter.
conditions in the "Technical data" chapter.
•
Connect the power adapter plug to the PSC11R-050 power adapter. The power adapter plug
must never be plugged into an electrical outlet without the PSC11R-050 power adapter.
must never be plugged into an electrical outlet without the PSC11R-050 power adapter.
•
The included PSC11R-050 power adapter complies with the requirements of the country in
which you purchased the Pocket PC. Make sure the PSC11R-050 power adapter is approved
for the country in which it is used.
which you purchased the Pocket PC. Make sure the PSC11R-050 power adapter is approved
for the country in which it is used.
•
The PSC11R-050 power adapter may only be connected to an electrical outlet when the Pocket
PC or the cradle is connected to the PSC11R-050 power adapter.
PC or the cradle is connected to the PSC11R-050 power adapter.
•
Do not use the PSC11R-050 power adapter for other devices.
•
Do not use power adapters which are not specially approved for this Pocket PC.
•
You may only operate the Pocket PC with the PSC11R-050 power adapter if the nominal
voltage of the PSC11R-050 power adapter (100 V to 240 V) matches the local mains voltage.
voltage of the PSC11R-050 power adapter (100 V to 240 V) matches the local mains voltage.
•
When transporting the device and on a trip, observe the information in the section "Underway
with the Pocket PC".
with the Pocket PC".
•
The high transmitting power of the consumer infrared interface (CIR) may cause technical
problems for infrared devices (e.g. mobile phone, PDA) which are not suitable for CIR or are too
close to the transmitter. Before you set up an Infrared data connection to a device such as a
mobile phone or PDA, check that the CIR is not active or not currently being used by another
program.
problems for infrared devices (e.g. mobile phone, PDA) which are not suitable for CIR or are too
close to the transmitter. Before you set up an Infrared data connection to a device such as a
mobile phone or PDA, check that the CIR is not active or not currently being used by another
program.
•
The Bluetooth and WLAN radio components are initialised and become active for a short period
if the batteries of the Pocket PC are changed or it is reset (cold boot or returned to delivery
condition). Be aware of this if you are in an environment where radio components must not be
used (e.g. hospital, aircraft).
if the batteries of the Pocket PC are changed or it is reset (cold boot or returned to delivery
condition). Be aware of this if you are in an environment where radio components must not be
used (e.g. hospital, aircraft).
A26391-K165-Z120-1-19, Edition 3
7