Yorkville YS1089 Manual Do Utilizador

2

YSM5, YSM6 and YSM8 
Powered Studio Monitors

Welcome to the next generation of Yorkville 

Sound Powered Studio Monitors. Building 

upon our technical knowledge and experience 

we have developed better sounding monitors 

which are easier to use in virtually any envi-

ronment.  The Yorkville Sound monitors are at 

home in professional recording studios, home 

studios and living rooms. We’re confident that 

the YSM5, YSM6 or YSM8 will help you cut to 

the mix and create fantastic music!

The YSM5, YSM6 and YSM8 feature 1-inch black-silk diaphragm neodymium dome 

tweeters.  These tweeters use specially designed waveguide bevelled edge housings. 

The waveguide bevelled edges perfectly couple the tweeter with the woofer, reducing 

sonic anomalies normally created by their proximity. The leading-edge fibre-composite 

cone woofers have also been designed to perform with sonic excellence, providing a 

wide dynamic range at all levels. Transparent bi-amplification is specifically optimised 

for each driver. This guarantees perfect performance and eliminates the phase irregu-

larities between tweeter and woofer that are usually associated with passive crossover 

networks.  
1. Mains Voltage Select Switch, Cord and Fuse Replacement                   

Before plugging  the power cord in the back of the YSM5, YSM6 or YSM8 set the 

Voltage Switch to the required voltage, either 110-120 VAC (North America) or 220-

240 VAC (Europe and Australia).  

i.  Power cord is connected.
ii. Power source is turned on.
iii. Fuse is blown, if replaced and it still blows then there is permanent fault inside 

the unit and should be returned to a Yorkville dealer. 

Mains Voltage

Select Switch

110-120

VAC

220-240

VAC