Yamaha SP2060 V1.2 Manual Do Proprietário

(5)-4

 

  1/2

 

* Please keep this manual in a safe place for future reference.

 

• Only use the voltage specified as correct for the device. The required voltage is 

printed on the name plate of the device.

• Use only the included power cord. 

If you intend to use the device in an area other than in the one you purchased, 
the included power cord may not be compatible. Please check with your Yamaha 
dealer.

• Do not place the power cord near heat sources such as heaters or radiators, and 

do not excessively bend or otherwise damage the cord, place heavy objects on 
it, or place it in a position where anyone could walk on, trip over, or roll anything 
over it.

• Be sure to connect to an appropriate outlet with a protective grounding 

connection. Improper grounding can result in electrical shock.

• Do not open the device or attempt to disassemble the internal parts or modify 

them in any way. The device contains no user-serviceable parts. If it should 
appear to be malfunctioning, discontinue use immediately and have it inspected 
by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet conditions, 

or place containers on it containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden 

loss of sound during use of the device, or if any unusual smells or smoke 
should appear to be caused by it, immediately turn off the power switch, 
disconnect the electric plug from the outlet, and have the device inspected by 
qualified Yamaha service personnel.

• If this device should be dropped or damaged, immediately turn off the power 

switch, disconnect the electric plug from the outlet, and have the device 
inspected by qualified Yamaha service personnel.

 

• Remove the electric plug from the outlet when the device is not to be used for 

extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the 

plug itself and not the cord. Pulling by the cord can damage it.

• Before moving the device, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is 

easily accessible. If some trouble or malfunction occurs, immediately turn off 
the power switch and disconnect the plug from the outlet. Even when the power 
switch is turned off, electricity is still flowing to the product at the minimum 
level. When you are not using the product for a long time, make sure to unplug 
the power cord from the wall AC outlet.

• If this device is to be mounted in an EIA-standard rack, leave the back of the rack 

open and make sure that it is at least 10 cm away from walls or surfaces. Also, if 
this device is to be mounted with devices that tend to generate heat, such as 
power amplifiers, be sure to keep an adequate gap between this device and the 
heat-generating devices or install ventilation panels to prevent high 
temperatures from developing inside this device.

Inadequate ventilation can result in overheating, possibly causing damage to the 
device(s), or even fire.

• If several of the devices are mounted in an EIA-compliant rack, carefully read the 

section “Precautions for Using a Rack-mounted SP2060” on page 8.

• Avoid setting all equalizer controls and faders to their maximum. Depending on 

the condition of the connected devices, doing so may cause feedback and may 
damage the speakers.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat 

(such as in direct sunlight, near a heater, or in a car during the day) to prevent 
the possibility of panel disfiguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall 

over.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile 

phone, or other electric devices. Doing so may result in noise, both in the device 
itself and in the TV or radio next to it.

• Before connecting the device to other devices, turn off the power for all devices. 

Before turning the power on or off for all devices, set all volume levels to 
minimum.