Yamaha SP2060 V1.2 Manual Do Proprietário
Ref
erences
Intr
oduction
to the SP2060
Fore
w
o
rd
The Contr
ols
and Connector
s
Netw
ork Settings
P
anel Operation
References
SP2060 Owner’s Manual
49
Crosstalk@1KHz
Fs=96kHz
LED Level Meters
Input/Output Characteristics
Analog Input Characteristics
Analog Output Characteristics
Digital Input Characteristics
Input
Output
Conditions
MIN
TYP
MAX
Units
INPUT A
OUTPUT 2, 4, 6
INPUT A assigned to OUTPUT 1, 3 or 5
INPUT B assigned to OUTPUT 2, 4 or 6
INPUT B assigned to OUTPUT 2, 4 or 6
–80
dB
INPUT B
OUTPUT 1, 3, 5
INPUT A assigned to OUTPUT 1, 3 or 5
INPUT B assigned to OUTPUT 2, 4 or 6
INPUT B assigned to OUTPUT 2, 4 or 6
–80
dB
*Crosstalk is measured with a 18dB/octave filter @80kHz.
Metering points
Conditions
MIN
TYP
MAX
Units
INPUT A, B
OVER red LED: On
0
dBFS
–6 amber LED: On
–6
dBFS
–12 amber LED: On
–12
dBFS
–18 amber LED: On
–18
dBFS
–30 green LED: On
–30
dBFS
–48 green LED: On
–48
dBFS
OUTPUT 1–6
OVER red LED: On
0
dBFS
LIMIT amber LED: On
LIMIT*
–6 green LED: On
–6
dBFS
–12 green LED: On
–12
dBFS
–18 green LED: On
–18
dBFS
–40 green LED: On
–40
dBFS
*The LED turns on when the internal limiter is activated.
Input Terminals
Actual Load
Impedance
For Use With
Nominal
Input level
Connector
Nominal
Max. before clip
INPUT A, B
10 k
Ω
600
Ω Lines
+4 dBu (1.23 V)
+24 dBu (12.28 V)
XLR-3-31 type (balanced) *1
*1. XLR-3-31 type connectors with latches are balanced. (1=GND, 2=HOT, 3=COLD)
*2. In these specifications, 0 dBu is referenced to 0.775 Vrms.
*3. All AD converters are 24-bit linear, 64-times oversampling. (Fs=96kHz)
*2. In these specifications, 0 dBu is referenced to 0.775 Vrms.
*3. All AD converters are 24-bit linear, 64-times oversampling. (Fs=96kHz)
Output
Terminals
Actual Load
Impedance
For Use With
Nominal
Input level
Connector
Nominal
Max. before clip
OUTPUT 1–6
75
Ω
600
Ω Lines
+4 dBu (1.23 V)
+24 dBu (12.28 V)
XLR-3-32 type (balanced) *1
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2. In these specifications, 0 dBu is referenced to 0.775 Vrms.
*3. All DA converters are 24-bit linear, 128-times oversampling (Fs=48kHz) or 64-times oversampling (Fs=96kHz).
*2. In these specifications, 0 dBu is referenced to 0.775 Vrms.
*3. All DA converters are 24-bit linear, 128-times oversampling (Fs=48kHz) or 64-times oversampling (Fs=96kHz).
Terminal
Format
Data length
Level
Connector
DIGITAL INPUT AES/EBU
AES/EBU
24 bit
RS422
XLR-3-31 type (balanced) *1 *2
*1. XLR-3-31 type connector with latch is balanced. (1=GND, 2=HOT, 3=COLD)
*2. Only Double Speed Format is supported at 96 kHz. Double Channel or Single Format is not supported.
*2. Only Double Speed Format is supported at 96 kHz. Double Channel or Single Format is not supported.