Yamaha DVD-S1800 Manual Do Proprietário

■ Digital connections

If you want to use the Dolby Digital, DTS, or MPEG 
function on your AV receiver, connect DIGITAL 
(OPTICAL) <A> or DIGITAL (COAXIAL) <B> jack of 
this unit to the corresponding input jacks of your AV 
receiver using a commercially available digital optical or 
digital coaxial cable.

• If you make a connection with <A> or <B>, set [Digital Out] 

to [All] (see “Setting the digital output” on page 31).

• If the audio format of the digital output does not match the 

capabilities of your receiver, the receiver produces a distorted 
sound or no sound at all. Make sure to select the appropriate 
audio format from the menu screen on the disc. 
Pressing AUDIO on the remote control once or more may 
change not only the audio languages but also the audio format.

• SA-CD audio signals are not output from DIGITAL 

(COAXIAL/OPTICAL) jacks.

• If you want to enjoy Dolby Digital, DTS, and MPEG formats, 

you must connect this unit to an AV receiver that supports 
these formats.

This unit has SCART, composite video, S-video, and 
component video output jacks. If your AV receiver has 
video output jacks, connect your receiver and then your 
TV so that you can use one TV for several different video 
sources (LD, VCR, etc.) by simply switching the input 
source selector on your receiver.
Use the one that corresponds to the input jacks on the 
component to be connected.

01EN_DVD-S1800_U.book  Page 11  Thursday, July 19, 2007  1:28 PM