Yamaha XMV4280/XMV4140/XMV4280-D/XMV4140-D Manual Do Proprietário

XMV4280/XMV4140/XMV4280-D/XMV4140-D Owner’s Manual

!4 [PRIMARY]/[SECONDARY] indicators 

These show the communication status of the Dante [PRI-
MARY]/[SECONDARY] connectors @1. They flash rapidly 
in green if the Ethernet cables are connected properly.

!5 [SYNC] Indicators 

These show the operating status of the Dante network. If the 
green (upper) indicator lights, the unit is operating as a word 
clock slave and synchronizing to the word clock. If the green 
indicator flashes, the unit is operating as the word clock mas-
ter. If the power to the unit is turned on but the green indica-
tor is turned off, the unit is not functioning properly. In this 
case, refer to the “Warning Messages” section (see page 29). 
If the orange indicator lights or flashes, refer to the “Warning 
Messages” section.

!6 [PANEL LOCK] indicator

This lights or flashes according to the state of the front panel 
lock. To specify the front panel lock setting, use the Device 
setup DIP switch @3.

!7 [FUNCTION] button

Use this to check or change the operating mode of the 
XMV’s front panel. For details on how to perform front 
panel operations, refer to “Front Panel Operations” (page 
23).

!8 Cooling vent

Located behind the vent is a variable speed cooling fan that 
draws air in from the front and exhausts it through the rear. 
The fan speed will automatically vary according to the tem-
perature.
Please be sure that you do not block the air intakes or 
exhaust vents. You should also clean the air intakes and 
exhaust vents regularly. If the air intakes are clogged with 
dust or debris, the unit will overheat, which may result in the 
unit shutting down.

Lit

Front panel operations are locked. Lock 
will be temporarily defeated if you press 
the [FUNCTION] button !7 and the 
[SELECT] A button t.

Unlit

Front panel operations are not locked.

Flashing

Lock is temporarily defeated. When the 
XMV is restarted, it will be in a locked 
state.