Yamaha DRX-2 Manual Do Utilizador

Installing your DVD recorder

7

Select the desired screen format position using w or v.
These settings will only be used if you insert a DVD that contains this information.

8

Confirm with ENTER/OK.

9

After you connect the aerial (or cable TV, satellite receiver, etc.) to the DVD 
recorder, press ENTER/OK.
The automatic TV channel search starts. “WAIT” will appear on the display.

0

When the automatic TV channel search is complete after several minutes of wait, 
“Auto ch. search complete” will appear on the TV screen.

A

To remove the menu, press the SYSTEM-MENU button on the recorder’s 
remote control.

The initial installation is now complete.

Which screen formats can I select?
“4:3 letterbox” for a “wide-screen” (cinema format) picture with black bars at the 

top and bottom.

for a full-height picture with the sides trimmed.

for a wide-screen TV set (screen edge ratio 16:9) 

✘ The DVD recorder cannot find any TV stations
 ✓ Select channel 1 on the TV set. Can you see the stored TV channel on the TV 

set?
If not, check the cable connection from the aerial (aerial jack) to the DVD 
recorder and to the TV set.

 ✓ Please have patience.

The DVD recorder searches the entire frequency range in order to find and save 
the largest possible number of TV channels.

 ✓ If you have not connected an aerial, go through all the basic settings right to the 

end and then, if you wish, start the automatic search (see “Automatic TV station 
search”). 

Initial Setup

TV Shape

Press OK to continue

4:3 letterbox
4:3 panscan
16:9

Installation

Auto Ch. Programming

Searching for TV channels

000 Channels found

Please wait