Yamaha DRX-2 Manual Do Utilizador

Programming a recording (TIMER)

✓ While a programmed recording is being made, you cannot operate your DVD 

recorder manually. If you want to cancel the programmed recording, press B/I.

✓ The DVD recorder was switched on several minutes before the start of a pro-

grammed recording. Switch off the DVD recorder using B/I. A programmed 
recording (timer) will only function if the DVD recorder is switched off (B/I but-
ton).

✓ Either a disc has not been inserted or the disc cannot be used for recording. Insert 

a disc on which recordings can be made. Switch off the DVD recorder using B/I.

✓ A write-protected disc has been inserted. Undo the write protection (see “Pre-

venting accidental erasing of discs” in “Manual recording”) or insert a different disc.

✓ If this error message appears after pressing TIMER, then all TIMER blocks are 

already programmed. No more recordings can be programmed. Press the u button. 
If you want to clear or check a programmed recording (TIMER block), select it with 

v or w.

✓ The data for the recording could not be transferred. Please check date, start time 

and end time of the programmed recording.

✓ Two programmed recordings overlap.
✓ If you ignore this error message the show with the earlier start time will be 

recorded first. The start of the second show will not be recorded.

✓ Change the setting for either of the two recordings.
✓ Clear either of the two recordings