Yamaha PJP-50R Manual Do Utilizador

■ Setting the country using the telephone 

 

This function switches the detected telephone circuit 
frequency according to the selection of the country where 
this system is used. One of the following countries can be 
selected.

If you cannot make communication correctly through the 
telephone circuit in Europe by setting “Country Code” to 
“Europe1”, set “Country Code” to “Europe2”.

Using the keys on this unit
In the initial display, select “Menu” 

→ “Settings” → 

“Phone” 

→ “Country Code”.

Using the Web menu
In the Web menu, select “Country Code”.

■ Setting the telephone circuit mode for 

 

You can select the telephone circuit mode when use this 
unit in Japan or China.

In case “Country Code” is set to “Japan”:
•

Mode 1 (Default): Use this mode under normal 
circumstances. The incoming call ringer does not ring when 
this unit has received the CND (Caller Number Display) CID 
(Caller ID) data from your telephone company.

•

Mode 2: Use this mode if the extension telephones do not 
respond properly to an incoming call in “Mode 1”. The 
incoming call ringer rings when this unit has received the 
CND (Caller Number Display) or CID (Caller ID) data from 
your telephone company.

In case “Country Code” is set to “China”:
•

Mode 1 (Default): This mode is compatible with the 
switchboard used in locations other than Hong Kong and Macau.

• Mode 2: This mode is compatible with the switchboard 

used in Hong Kong and Macau.

y

• When “Country Code” is set to a setting other than “Japan” and 

“China”, the telephone circuit type settings do not affect the 
functions of this unit.

• When you make changes to “Country Code”, “Line Mode” 

automatically changes to “Mode 1”.

Using the keys on this unit
In the initial display, select “Menu” 

→ “Settings” 

→ “Phone” → “Line Mode”.

Using the Web menu
In the Web menu, select “Line Mode”.

■ Selecting the audio pickup area 

You can select the audio pickup area of the microphone 
during a call. 
• Zone (Default): Pick up the audio from a large area. 

This mode is suitable for a relatively quiet 

environment. This mode is indicated by 

 on the 

initial display.

• Spot: Fix the audio pick up area to the front of the 

microphone by narrowing the directivity. This mode is 
suitable when the number of talkers is limited to one or 
two, or when there is equipment that produces noise 
such as a projector nearby.
To specify the audio pick up area, use the numeric keys 
in the “Microphone Mode” menu. When a key is 
pressed, the areas in the direction of the pressed key 
and the opposite direction is enabled or disabled. The 
following illustration shows the areas enabled by 
pressing .

Microphone indicators (blue LED) of which direction 
audio can be picked up from all light up. This mode is 

indicated by 

 on the initial display.

y

Each pair of areas should be positioned in opposite 
directions (i.e. pairs of 1 and 9, 2 and 8, 3 and 7, and/or 4 
and 6).

MIC MUTE

VOL

MIC MUTE

VOL

MIC  MUTE

VOL

4

7

0

8

5

2

6

3

9

#

1

/STANDBY

HOOK

2

MIC  MUTE

VOL

4

7

0

8

5

2

6

3

9

#

1

HOOK

/STANDBY