Yamaha PJP-50R Manual Do Utilizador

Enter and run the following command.
tftp -i [IP address of this unit] put [file name of the 
firmware]
Example: 
tftp -i 192.168.100.200 put pjp50r_13.bin

y

Set the directory containing the firmware as the current 
directory before executing the above command.

When the system shows the revision 
upgrading confirmation message, 
press .
The revision upgrading operation will start.

■ To cancel the firmware update

In step 4, press 

.

MIC MUTE (orange LED) on the top panel of this unit 
flashes during the firmware update process. Do not turn 
this unit off while MIC MUTE (orange LED) is flashing.

This unit restarts automatically.
Check the version number in the “Program Version” on 
the top of the Web menu to confirm that the new firmware 
has been installed properly.

• Once the firmware update is started, do not perform any other 

operation until the update operation is completed and this unit is 
restarted. If the update operation is interrupted, this unit may 
become unusable, in which case you need to return this unit to 
the factory for repairs.

• When the firmware update is completed, this unit is restarted 

automatically. All of the ongoing calls are disconnected at this 
time.

• Do not unplug the power cable during the firmware update. 

Otherwise, this unit could become unusable, in which case you 
need to return this unit to the factory for repairs.