Yamaha Bicycle WR45OFR Manual Do Utilizador
4 - 101
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
2. Install:
●
2nd wheel gear (26T) 1
●
4th wheel gear (21T) 2
●
3rd wheel gear (21T) 3
●
5th wheel gear (21T) 4
●
1st wheel gear (29T) 5
●
O-ring 6
To drive axle 7.
To drive axle 7.
NOTE:
●
Apply the molybdenum disulfide oil on the
1st, 2nd and 3rd wheel gears inner circum-
ference and on the end surface.
1st, 2nd and 3rd wheel gears inner circum-
ference and on the end surface.
●
Apply the molybdenum disulfide oil on the
4th and 5th wheel gears inner circumfer-
ence.
4th and 5th wheel gears inner circumfer-
ence.
●
Apply the lithium soap base grease on the O-
ring.
ring.
3. Install:
●
Plain washer 1
●
Circlip 2
NOTE:
●
Be sure the circlip sharp-edged corner
a is
positioned opposite side to the plain washer
and gear
and gear
b.
●
Be sure the circlip end
c is positioned at
axle spline groove
d.
New
4. Install:
●
Collar 1
NOTE:
●
Apply the lithium soap base grease on the oil
seal lip.
seal lip.
●
When installing the spacer into the crank-
case, pay careful attention to the crankcase
oil seal lip.
case, pay careful attention to the crankcase
oil seal lip.