ZyXEL Communications Security Camera 3.1 Manual Do Utilizador

Chapter 6 Interfaces

ZyWALL (ZLD) CLI Reference Guide

[no] host ip

Specifies the static IP address the ZyWALL should assign. Use this 
command, along with 

hardware-address

, to create a static 

DHCP entry.

Note: The IP address must be in the same subnet as the interface to 

which you plan to bind the DHCP pool.

When this command is used, the ZyWALL treats this DHCP pool like a 
static entry, regardless of the 

network

 setting. The 

no

 command 

clears this field.

[no] hardware-address mac_address

Reserves the DHCP pool for the specified MAC address. Use this 
command, along with 

host

, to create a static DHCP entry. The 

no

 

command clears this field.

[no] client-identifier mac_address

Specifies the MAC address that appears in the DHCP client list. The 

no

 command clears this field.

[no] client-name host_name

Specifies the host name that appears in the DHCP client list. The 

no

 

command clears this field.

: You may use 1-31 alphanumeric characters, 

underscores(

_

), or dashes (-), but the first character cannot be a 

number. This value is case-sensitive.

Use the following commands to create a pool of IP addresses. These 
commands have no effect if you use the 

host

 command. You can 

still set them, however.

dhcp-option <1..254> option_name 

{boolean <0..1>| uint8 <0..255> | 

uint16 <0..65535>

| uint32 <0..4294967295> | ip ipv4 [ 

ipv4 [ ipv4]] | fqdn fqdn [ fqdn [ 

fqdn]] | text text | hex hex | vivc 

enterprise_id hex_s [enterprise_id 

hex_s ] | vivs enterprise_id hex_s 

[enterprise_id hex_s ]

Adds or edits a DHCP extended option for the specified DHCP pool.

: String of up to 250 characters

: String of up to 250 hexadecimal pairs.

: Vendor-Identifying Vendor Class option. A DHCP client may use 

this option to unambiguously identify the vendor that manufactured 
the hardware on which the client is running, the software in use, or 
an industry consortium to which the vendor belongs.

: Number <0..4294967295>.

: String of up to 120 hexadecimal pairs.

: Vendor-Identifying Vendor-Specific option. DHCP clients and 

servers may use this option to exchange vendor-specific information. 

no dhcp-option <1..254>

Removes the DHCP extended option for the specified DHCP pool.

network IP/<1..32>

network ip mask

no network

Specifies the IP address and subnet mask of the specified DHCP pool. 
The subnet mask can be written in w.x.y.z format or in /<1..32> 
format.

Note: The DHCP pool must have the same subnet as the interface to 

which you plan to bind it.

The 

no

 command clears these fields.

[no] default-router ip

Specifies the default gateway DHCP clients should use. The no 
command clears this field.

[no] description description

Specifies a description for the DHCP pool for identification. The no 
command removes the description.

[no] domain-name domain_name

Specifies the domain name assigned to DHCP clients. The no 
command clears this field.

interface Commands: DHCP Settings (continued)