ZyXEL STB-1001S2 Manual Do Utilizador
![ZyXEL](https://files.manualsbrain.com/attachments/3214a2e9b754be0b3a733d7fd22528bce8dfdece/common/fit/150/50/aafad0ddc2d0e29fd47cd3dd2d9b75f1e404d4f49531d3941fba34789d6b/brand_logo.jpeg)
STB-1001S2 User’s Guide
31
C
H A P T E R
3
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
problems are divided into the following categories.
•
•
•
3.1 Power, Hardware Connections, and LEDs
V
The STB does not turn on. None of the LEDs turn on.
1 Make sure the STB is turned on.
2 Make sure you are using the power adaptor or cord included with the STB.
3 Make sure the power adaptor or cord is connected to the STB and plugged in to an
2 Make sure you are using the power adaptor or cord included with the STB.
3 Make sure the power adaptor or cord is connected to the STB and plugged in to an
appropriate power source. Make sure the power source is turned on.
4 Turn the STB off and on.
5 If the problem persists, contact the vendor.
5 If the problem persists, contact the vendor.
V
The POWER (
) LED is red, or blinking green.
1 The STB may be in standby mode. Try using the remote control’s
button to turn it on.
2 Wait for a short while. The STB may take a minute or so to start up.
3 If the LED still does not turn steady green, turn the STB off and on.
4 If the problem persists, contact the vendor.
3 If the LED still does not turn steady green, turn the STB off and on.
4 If the problem persists, contact the vendor.
V
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See
.