ZyXEL M-302 Manual Do Utilizador

Página de 81
M-302 User’s Guide
Chapter 2 Tutorial
25
C
H A P T E R
2
Tutorial
The following sections show you how to join a wireless network using the ZyXEL utility, as in 
the following diagram. The wireless client is labeled C and the access point is labeled AP.
There are three ways to connect the wireless client to a network.
• Configure nothing and leave the wireless client to automatically scan for and connect to 
any available network that has no wireless security configured.
• Manually connect to a network.
• Configure a profile to have the wireless client automatically connect to a specific network 
or peer computer. 
This tutorial shows you how to manually connect to a network, and how to configure a profile.
2.1  Connecting to a Wireless LAN
This example illustrates how to manually connect your wireless client to an access point (AP) 
configured for WPA-PSK security. Before you connect to the access point, you must know its 
Service Set IDentity (SSID) and WPA-PSK pre-shared key. In this example, the AP’s SSID is 
“SSID_Example3” and its pre-shared key is “ThisismyWPA-PSKpre-sharedkey”. 
After you install the ZyXEL utility and then insert the wireless client, follow the steps below 
to connect to a network using the Site Survey screen. 
Open the ZyXEL utility and click the Site Survey tab to open the screen shown next.