VIZIO TL-WR641G Manual Do Utilizador

 

 

- 67 - 

1)  Login to the router, click the “Network” menu on the left of your browser, and click 

"WAN" submenu. On the WAN page, select “Dynamic IP” for "WAN Connection Type", 

finish by clicking “Save”. 

2)  Some ISPs require that you register the MAC Address of your adapter, which is 

connected to your cable/DSL Modem during installation. If your ISP requires MAC 

register, login to the router and click the "Network" menu link on the left of your browser, 

and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s 

MAC address is proper MAC address, click the "Clone MAC Address" button and your 

PC’s MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC 

Address into the "WAN MAC Address" field. The format for the MAC Address is 

XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting. 

 

Figure A-3 

1)  If you start Netmeeting as a sponsor, you don’t need to do anything with the router. 

2)  If you start as a response, you need to configure Virtual Server or DMZ Host. 

3)  How to configure Virtual Server: Login to the router, click the “Forwarding” menu on the 

left of your browser, and click "Virtual Servers" submenu. On the "Virtual Server" page, 

click Add New, then on the “Add or Modify a Virtual Server” page,    enter “1720” into 

the blank behind the “Service Port”, and your IP address behind the IP Address, 

assuming 192.168.1.169 for an example, remember to “Enable” and “Save”. 

 

Figure A-4