VIZIO TL-R480T Manual Do Utilizador

2)  Some ISPs require that you register the MAC address of your adapter, which is 

connected to your cable or DSL modem during installation. If your ISP requires 
MAC register, login to the router and click the "Network" menu link on the left of 
your browser, and then click "MAC Clone" submenu link. On the "MAC Clone" 
page, if your PC’s MAC address is a proper MAC address, click the "Clone 
MAC Address" button and your PC’s MAC address will fill in the "WAN MAC 
Address" field. Or else, type the MAC address into the " WAN MAC Address" 
field. The format for the MAC address is XX-XX-XX-XX-XX-XX. Then click the 
"Save" button. It will take effect after rebooting. 

 

Figure A-3  MAC Clone 

1)  If you start Netmeeting as a sponsor, you don’t need to do anything with the 

router. 

2)  If you start as a responsor, you need configure Virtual Server or DMZ Host. 
3)  How to configure Virtual Server: Login to the router, click the “Forwarding” menu 

on the left of your browser, and click " Virtual Servers" submenu. On the "Virtual 
Server" page, enter “1720” into the blank below the “Service Port”, and your IP 
address below the IP Address, assuming 192.168.1.169 for an example, 
remember to “Enable” and “Save”.   

 

Figure A-4  Virtual Server 

: Your opposite side should call your WAN IP, which is displayed on the 

“Status” page. 

4)  How to enable DMZ Host: Login to the router, click the “Forwarding” menu on 

the left of your browser, and click " DMZ" submenu. On the "DMZ" page, click 

 

- 47 -