Visioneer MX 230 Manual Do Utilizador
T
ROUBLESHOOTING
53
Problem: The flash doesn’t work.
Problem: When turned on, the LED flashes green, red,
orange, and green. Then the camera does not function.
orange, and green. Then the camera does not function.
Problem: The Visioneer Digital Camera Utility will not run
when the camera is set to PC mode.
when the camera is set to PC mode.
Possible Cause
Solution
The flash is not turned on.
The batteries are weak and the
flash is unable to recharge.
flash is unable to recharge.
Turn the camera off and wait a
few seconds before turning it
back on. If this doesn’t work,
replace the batteries.
few seconds before turning it
back on. If this doesn’t work,
replace the batteries.
Possible Cause
Solution
The Secure Digital card is not
inserted correctly.
inserted correctly.
Possible Cause
Solution
Your computer monitor’s display
is set to less than 24 bit color
depth.
is set to less than 24 bit color
depth.
Right-click your desktop and
select Properties. On the Display
Properties window, click the
Settings tab. Set the Colors value
to True Color (24 bit) or higher.
select Properties. On the Display
Properties window, click the
Settings tab. Set the Colors value
to True Color (24 bit) or higher.