VBrick Systems Server ETV v3.1 Manual Do Utilizador
Administration
ETV Portal Server Administrator Guide
21
3. In
Select VBrick
, select one or more existing VBricks for which a SAP has been received.
If you select one VBrick, this populates the
VBrick Configuration
panel. (If you select
multiple VBricks, it does not populate the panel; if you need to configure the VBricks,
you must add them one at a time.)
you must add them one at a time.)
4. Complete or modify the fields in
VBrick Configuration
as necessary and click
Submit
.
This adds the new configuration to the list of configured VBricks shown on the previous
page.
page.
Note
The only time you will manually complete the VBrick Configuration fields is when
you are defining the configuration for a VBrick that will be added to the network at
a later time. In this case, you will need to know the configuration data in advance.
you are defining the configuration for a VBrick that will be added to the network at
a later time. In this case, you will need to know the configuration data in advance.
Host Name
Required. Host name of VBrick.
IP Address
Required. IP address of VBrick.
User Name
Defaults to system-defined value if blank.
User Password
Defaults to system-defined value if blank.
Confirm Password Defaults to system-defined value if blank. Must match User Password
if entered above.
Software Revision
Optional. To get the Software Revision in Integrated Web Server
(IWS), go to
(IWS), go to
Status > System Information >
Release Revision.
HTTP Port
Optional. To get the HTTP Port in Integrated Web Server (IWS), go
to
to
Configuration > System > Securit y >
IWS Server Port.
VBrick Model
Select from dropdown. Advanced settings are enabled if you select an
encoder or a VBStar.
encoder or a VBStar.