Vaillant VRT 360f Operating and Guia De Utilização
32
Installation instructions VRT 360f
Fig. 9.1 Connection to one boiler
Install the receiver outside the heating
unit using the plinth supplied (Fig. 9.1)
unit using the plinth supplied (Fig. 9.1)
• Pull the receiver (1) off the wall plinth
(2).
• Drill two holes (3) of 6 mm diameter
(as shown in fig. 9.2) and put in the
supplied wall plugs.
supplied wall plugs.
• Push the connection cable (4) through
the cable ducting (5).
• Attach the wall plinth to the wall with
the two screws provided.
• Connect the cable as described in
Chapter 10.
• Place the receiver (1) on the wall plinth
so that the pins on the back of the
upper section fit into the receptacles.
upper section fit into the receptacles.
• Push the receiver onto the wall plinth
until it clicks.
9 Installation