Utica Boilers UB95M-200 Instrução De Instalação

3 - IMPORTANT SAFETY INFORMATION

NOTICE

Used to address practices not related to personal

injury.

CAUTION

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

WARNING

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in death or serious injury

This is the safety alert symbol. Symbol alerts you to

potential personal injury hazards. Obey all safety messages

following this symbol to avoid possible injury or death.

Become familiar with symbols identifying
potential hazards.

3.1 General
Boiler installation shall be completed by qualified agency.

See glossary for additional information.

WARNING

Fire, explosion, asphyxiation and electrical shock

hazard. Improper installation could result in death or

serious injury. Read this manual and understand all

requirements before beginning installation.

Keep this manual near boiler

Retain for future reference

3.2 Installation shall conform to requirements of

authority having jurisdiction or in absence of such

requirements:

• United States

• National Fuel Gas Code, ANSI Z223.1/NFPA 54.
• National Electrical Code, NFPA 70.

• Canada

• Natural Gas and Propane Installation Code, CAN/CSA

B149.1. and .2

• Canadian Electrical Code, Part I, Safety Standard for

Electrical Installations, CSA C22.1

3.3 Where required by authority having jurisdiction,

installation shall conform to Standard for Controls

and Safety Devices for Automatically Fired Boilers,

ANSI/ASME CSD-1.
Additional manual reset low water cutoff and/or manual

reset high limit may be required.

3.4 Requirements for Commonwealth of

Massachusetts:
Boiler installation must conform to Commonwealth of

Massachusetts code 248 CMR which includes but is not

limited to:

• Installation by licensed plumber or gas fitter.

Installers - Follow local regulations with respect to

installation of CO (Carbon Monoxide) Detectors. Follow

maintenance recommendations “Maintenance And

Cleaning” Section 14 page 25.