Utica Boilers SSC Instrução De Instalação

Fire, explosion, asphyxiation and electrical shock 

hazard.  Improper installation could result in death or 

serious injury.  Read this instruction and understand 

all requirements, including requirements of authority 

having jurisdiction, before beginning installation.  

Installation not complete until appliance operation 

is verified per Installation, Operation & Maintenance 

Manual provided with boiler.

  

 P/N 240010265 Rev. B  [08/2013]

Kit installation shall be completed by qualified agency.

Left Upright - not interchangeable

1

Right Upright - not interchangeable

1

Base Leg

2

Brace

2

Upper Cross Member

1

Lower Cross Member

1

Base Foot

4

1/4 - 20 x ⅝ Serrated Hex Flange Head Bolt

26

1/4 - 20 Serrated Hex Flange Head Nut

26

5/16 - 18  x ¾ Serrated Hex Head Bolt (Use for Boiler 

4

5/16 - 18 Serrated Hex Flange Head Nut (Use for 

4

Upper Cross 

Member

Left 

Upright

Right 

Upright

Bolts

Brace

Lower Cross 

Member

Base 

Leg

Base 

Foot

Fire, explosion hazard. Mount boiler vertically or 

slightly tilted backward to insure proper function of 

low water cutoff. Failure to follow these instructions 

could result in death or serious injury.

Boiler weight exceeds 75 pounds (34 kg). Do not 

lift boiler onto stand without assistance.

  

Lift boiler using chassis. Using front jacket, vent 

piping, water or gas fittings to lift boiler may cause 

damage to the boiler. 

Nuts

• United States 

• National Fuel Gas Code, ANSI Z223.1/NFPA 54. 
• National Electrical Code, NFPA 70.

• Canada 

• Natural Gas and Propane Installation Code,       

CAN/CSA B149.1.

• Canadian Electrical Code, Part I, Safety Standard 

for Electrical Installations, CSA C22.1

Overall Dimension see Figure 9 page 4.

This stand is capable of supporting one (1) boiler 

only. Any changes to this stand or installation could 

result in serious injury or death.