Universal Security Instruments MICN109 Ficha De Dados
Page 1 of 3
QUICK REFERENCE GUIDE
MICN109/MICN109L
OPERATIONAL SUMMARY
AUDIBLE & VISUAL SIGNALS
CONDITION /
RECOMMENDATION
HORN
POWER
GREEN LED
SMOKE
RED LED
GAS
BLUE LED
CO
RED LED
Silent
On and Blinks
Off approx.
every 20
seconds
Off
Off
Off
Condition: AC power is present. DC power is
present.
Recommendation: None
present.
Recommendation: None
Silent
Off and Blinks
On approx.
every 40
seconds
Off
Off
Off
Condition: Alarm is powered by battery
backup. AC power is not present.
Recommendation: Check the breaker or
fuse box for power. If the breaker or fuse box
looks normal, call a licensed electrician for
assistance.
backup. AC power is not present.
Recommendation: Check the breaker or
fuse box for power. If the breaker or fuse box
looks normal, call a licensed electrician for
assistance.
3 beeps,
2 second pause,
3 beeps,
6 second pause,
4 beeps,
5 second pause,
1 beep
Turns off when
the 3 beeps
start
Blinks on
during the
cycle of 3
beeps and
turns off
Blinks On in
sync with the 1
beep
Blinks On in
sync with the
cycle of 4
beeps and
turns off
Condition: The Test/Silence button has been
pressed. The test sequence lasts for approx.
20 seconds.
Recommendation: None
pressed. The test sequence lasts for approx.
20 seconds.
Recommendation: None
Horn does not
sound when other
alarms are active or
when
interconnected
alarm
’s test/reset
button is pressed
*See below
Off
Off
Off
Condition: One or more alarms not
responding to interconnected alarm.
Recommendation: Press and hold the
smoke alarm Test/Silence button for at least 5
seconds. If still no alarm, turn off AC power at
the circuit breaker or fuse box and disconnect
the alarm from the mounting bracket and
make sure the connector plug is securely
attached on units that did not alarm. If still no
alarm, have a licensed electrician make sure
the yellow wire is not mistakenly or
accidentally connected to the white (neutral)
wire.
responding to interconnected alarm.
Recommendation: Press and hold the
smoke alarm Test/Silence button for at least 5
seconds. If still no alarm, turn off AC power at
the circuit breaker or fuse box and disconnect
the alarm from the mounting bracket and
make sure the connector plug is securely
attached on units that did not alarm. If still no
alarm, have a licensed electrician make sure
the yellow wire is not mistakenly or
accidentally connected to the white (neutral)
wire.
3 beeps,
2 second pause,
repeat
Turns off when
the 3 beeps
start
Blinks On
approx. once
every second
Off
Off
Condition: Originating Smoke Alarm.
Recommendation: If hazard is identified,
take all precautions if an alarm sounds by
calling an Emergency Service and getting out
of the home.
Recommendation: If hazard is identified,
take all precautions if an alarm sounds by
calling an Emergency Service and getting out
of the home.
3 beeps,
2 second pause,
repeat
Turns off when
the 3 beeps
start
Off
Off
Off
Condition: Non-originating Smoke Alarm.
Recommendation: Another interconnected
smoke alarm has sensed smoke, causing all
interconnected units to sound. If hazard is
identified, take all precautions if an alarm
sounds by calling an Emergency Service and
getting out of the home.
Recommendation: Another interconnected
smoke alarm has sensed smoke, causing all
interconnected units to sound. If hazard is
identified, take all precautions if an alarm
sounds by calling an Emergency Service and
getting out of the home.
4 beeps,
5 second pause,
repeat
Turns off when
the 4 beeps
start
Off
Off
Blinks On in
sync with 4
beeps
Condition: Originating CO Alarm.
Recommendation: If hazard is identified,
take all precautions if an alarm sounds by
calling an Emergency Service and getting out
of the home.
Recommendation: If hazard is identified,
take all precautions if an alarm sounds by
calling an Emergency Service and getting out
of the home.
4 beeps,
5 second pause,
repeat
Turns off when
the 4 beeps
start
Off
Off
Off
Condition: Non-originating CO Alarm.
Recommendation: An interconnected CO
alarm has sensed CO, causing all
interconnected units to sound. If hazard is
identified, take all precautions if an alarm
sounds by calling an Emergency Service and
getting out of the home.
Recommendation: An interconnected CO
alarm has sensed CO, causing all
interconnected units to sound. If hazard is
identified, take all precautions if an alarm
sounds by calling an Emergency Service and
getting out of the home.
1 beep,
2 second pause,
repeat
Turns off when
the 1 beep
starts
Off
Blinks On in
sync with the 1
beep
Off
Condition: Originating GAS Alarm.
Recommendation: If hazard is identified,
take all precautions if an alarm sounds by
calling an Emergency Service and getting out
of the home.
Recommendation: If hazard is identified,
take all precautions if an alarm sounds by
calling an Emergency Service and getting out
of the home.