Universal CONTROL WR7 Manual Do Utilizador

Page 24

Using the Number Pad, punch in the Channel 

number of the Favorite Channel that you want to store in the
Macro button. The CABLE/SAT component LED light will blink
once for each button pressed.

Press the CHANNEL UP [CH  ] button to store the 

commands entered. The [CABLE/SAT] component LED will blink
three times to confirm the programming.

• You can program up to 20 commands on each Macro button.
• You can program delays in between commands by pressing 

the [PAUSE] button. Each press adds a one-half second delay.

• Also, if you add the delay time as the first step of Macro 

commands, the remote will not send the Macro unless the 
button is held for two seconds. (This is the Press & 
Hold Function).

• You can also program macro commands in ‘layers’ by 

pressing the [STOP] button in between commands. 
(For example, if you press [009], [STOP], [035], [STOP],
[365], [STOP] in Step 3 of the Favorite Channel programming
process) the remote will send out 009 at the first press of the
selected  [My Favorites] button, and then send out 035 at the
second press, etc.

• You cannot program the [CH  ] or [PAUSE] buttons as 

macro commands.

WR7  1/13/08  12:18 PM  Page 24