Unitron Hearing Aid Unitron I/E Zhuhai Co., Ltd. Oxygen Equipment UMIC Manual Do Utilizador
9
8
Put uMic into pairing mode:
If the uMic has never been paired before,
pairing mode will be automatically activated
after turning it on.
after turning it on.
To manually start pairing mode:
1. Switch the uMic off.
2. Press and hold the volume up
1. Switch the uMic off.
2. Press and hold the volume up
button ( ).
3. Turn the uMic on while still
pushing the ( ) button.
4. Release the ( ) button after
2 seconds when the indicator light rapidly
blinks blue.
blinks blue.
5. Make sure the uDirect 2 and uMic are within
1 m (3 ft) range of each other.
The uMic will remain in pairing mode for two
minutes or until the pairing is completed.
minutes or until the pairing is completed.
Pairing the uMic with uDirect 2
Before using the uMic with a streamer for the
first time, the devices must be paired with each
other.
first time, the devices must be paired with each
other.
If you are not using uDirect 2 but another
streamer, please follow the Bluetooth pairing
procedure of that device.
procedure of that device.
Put uDirect 2 into pairing mode:
1. Switch on the uDirect 2.(
1. Switch on the uDirect 2.(
).
2. Press and hold the connect (
) and volume
( ) buttons simultaneously for 2 seconds
until the audio indicator starts to rapidly
blink blue. The uDirect 2 will remain in pairing
mode for two minutes or until the pairing is
complete.
until the audio indicator starts to rapidly
blink blue. The uDirect 2 will remain in pairing
mode for two minutes or until the pairing is
complete.
2 sec