Uniden UDC-7M Manual Do Utilizador

English

Release your finger from the shutter button.
h The captured image is recorded.

i When the shutter button is pressed halfway, the camera focuses on the subject, and 

as long as the shutter button is kept pressed halfway, the focus is fixed (locked) at 
the same distance. This is called “focus lock”. After focusing on the subject, you can 
then reorient the camera while keeping the shutter button pressed halfway to 
compose the picture you like.

When the focus mode (page 58) is set to the 9-point focus mode B...

i A target mark & on the monitor shows the area the camera is focusing on.
i The camera automatically determines the 

correct focus by measuring from 9 different 
focus points within the shooting area. If the 
target mark is at a position that is different 
from the point you wish to focus on, you 
can refocus, for example, by changing the 
shooting angle.

i The large target mark appears when the 

camera focuses on a wide area in the 
center of the screen.

i A green focus indicator appears when the 

subject is successfully focused, or a red 
focus indicator when the camera was not 
able to focus the subject.

i The shutter speed and aperture settings 

are also displayed on the monitor. You can 
use them as a reference when shooting.

i During still image shooting, if the shutter 

speed is slow and the possibility that the 
image may be blurred due to camera 
shake becomes high, the motion alert icon 
may appear on the monitor. In this case, 
use a tripod to stabilize the camera when 
shooting, or set the flash operation mode 
to automatic (page 47).

i When shooting with the fireworks ^ 

scene function, the motion alert icon 
always appears, but this is normal.

Shutter speed
Aperture

Target mark

Focus indicator

Motion alert icon